Non-Ferrous Metals

- Suitable for trimming with a medium/fine finish on aluminium and plastic profiles. - Triple chip, negative hook. - Material must be firmly clamped on both sides of cut and sawblade should be lubricated during use. - For use on mitre, double cross-cutting and sizing machines. - Other bore sizes available, see page 17.

DIAMETER	TEETH	KERF - MM	PLATE - MM	BORE - MM	SKU
DIAMETER: 250	TEETH: 60	KERF - MM: 3.2	PLATE - MM: 2.6	BORE - MM: 30	SKU: IT/90200806
DIAMETER: 250	TEETH: 80	KERF - MM: 3.2	PLATE - MM: 2.6	BORE - MM: 30	SKU: IT/90202706
DIAMETER: 250	TEETH: 100	KERF - MM: 3.2	PLATE - MM: 2.6	BORE - MM: 30	SKU: IT/90202756
DIAMETER: 275	TEETH: 72	KERF - MM: 3.2	PLATE - MM: 2.6	BORE - MM: 32	SKU: IT/90200857
DIAMETER: 300	TEETH: 72	KERF - MM: 3.2	PLATE - MM: 2.6	BORE - MM: 30	SKU: IT/90200906
DIAMETER: 300	TEETH: 96	KERF - MM: 3.2	PLATE - MM: 2.6	BORE - MM: 30	SKU: IT/90202806
DIAMETER: 330	TEETH: 80	KERF - MM: 3.2	PLATE - MM: 2.6	BORE - MM: 32	SKU: IT/90200957
DIAMETER: 330	TEETH: 102	KERF - MM: 3.2	PLATE - MM: 2.6	BORE - MM: 30	SKU: IT/90202856
DIAMETER: 330	TEETH: 102	KERF - MM: 3.2	PLATE - MM: 2.6	BORE - MM: 32	SKU: IT/90202857
DIAMETER: 350	TEETH: 84	KERF - MM: 3.2	PLATE - MM: 2.6	BORE - MM: 30	SKU: IT/90201006
DIAMETER: 350	TEETH: 108	KERF - MM: 3.2	PLATE - MM: 2.6	BORE - MM: 30	SKU: IT/90202906
DIAMETER: 380	TEETH: 100	KERF - MM: 2.8	PLATE - MM: 2.2	BORE - MM: 30	SKU: IT/90202956
DIAMETER: 400	TEETH: 96	KERF - MM: 3.8	PLATE - MM: 3.2	BORE - MM: 30	SKU: IT/90201106
DIAMETER: 400	TEETH: 120	KERF - MM: 3.8	PLATE - MM: 3.2	BORE - MM: 30	SKU: IT/90203006
DIAMETER: 420	TEETH: 96	KERF - MM: 4	PLATE - MM: 3.4	BORE - MM: 30	SKU: IT/90203406
DIAMETER: 450	TEETH: 108	KERF - MM: 4	PLATE - MM: 3.4	BORE - MM: 30	SKU: IT/90204006
DIAMETER: 450	TEETH: 120	KERF - MM: 4	PLATE - MM: 3.4	BORE - MM: 30	SKU: IT/90204106
DIAMETER: 500	TEETH: 120	KERF - MM: 4.4	PLATE - MM: 3.8	BORE - MM: 30	SKU: IT/90204206

- Suitable for trimming with a medium/fine finish on aluminium and plastic profiles.

- Triple chip, negative hook.

- Material must be firmly clamped on both sides of cut and sawblade should be lubricated during use.

- For use on mitre, double cross-cutting and sizing machines.

- Other bore sizes available, see page 17.